Tile & Grout Cleaning and Sealing


Our 10 step exclusive Tile and Grout is outlined below:


Step 1: Our process starts out with a complete pre-inspection of the area that is to be cleaned, our technician is looking for any problem areas or areas requiring a little more detail.


Step 2: We then begin tapping and protecting your home’s interior areas of concern.


Step 3: We then apply our special product to degrease and break up the soiling it also will lightly etch your grout joint to refresh it to the original color.


Step 4: Next we agitate the tile and grout with our floor machine and special brush that is designed for the most heavily soiled conditions. We hand scrub corners, baseboards, and hard to reach areas.


Step 5: We then rinse all of the soiling and solution with high pressured steam extraction, leaving your areas phenomenally clean, don’t worry there is no over spray at all, it is all self contained.


Step 6: The next thing is to bring in our air movers in to dry the floors as fast as possible.


Step 7: This is crucial!! Remember your grout is just colored concrete that is porous and stains easily. So with that said, we recommend sealing your newly restored grout joints. We do this by applying a great deal of our clear solvent based impregnating sealer in the grout.


Step 8: After the sealer is mostly absorbed, we then wipe the excess off of the surrounding tiles.


Step 9: Now we will utilize our floor machine to give a final buff of your floor to ensure everything is evenly removed.


Step 10: Our technician will finally walk through the job with you to ensure you are thrilled with the service